To apply clear coat, wait until your paint is completely dry, then brush Madex Polyurethane Clear Coat on directly from the tin without thinning it. You can do this on the same day. Clear coat protects the painted surface from scratches, marks and daily use.
This guide is for anyone who has finished painting furniture, a door or a craft project and wants the colour to last. It follows on from our chalk paint guide.
What does clear coat do?
Clear coat is a protective layer that goes over dry paint. It helps the painted surface handle scratches, marks and everyday use, which matters most on things you touch often, such as tables, chairs, doors and bed frames.
What you need
- A painted surface that is completely dry
- Madex Polyurethane Clear Coat
- A clean brush (see our brushes and rollers)
- A clean, dry cloth to wipe off dust
- Newspaper or a sheet to protect the floor
How to apply clear coat: step by step
- Check that the paint is completely dry. This is the one rule that matters. Chalk paint dries in about two to three hours per coat, so after your last coat make sure the surface is dry.
- Wipe off any dust. Use a clean, dry cloth so no dust gets trapped under the clear coat.
- Brush the clear coat on directly. Use it straight from the tin. Do not add water or thin it.
- Spread it in thin, even strokes. Cover the whole painted area, and avoid thick patches in corners and edges.
- Let it dry before use. Keep the piece in a clean place and do not touch the surface while it dries.
How long should you wait after painting?
You can apply clear coat on the same day, as soon as the paint is completely dry. Waiting 10 to 12 hours is also fine, especially if you painted late in the day. The timing is not fixed. What matters is that the paint is dry.
How much clear coat do you need?
Madex Clear Coat has the same coverage as Madex Chalk Paint. A 500ml tin covers 60 sq ft, enough for a double bed or a standard door, both sides. So a 500ml tin of clear coat protects the same area you painted with 500ml of paint. Coverage varies with the surface, and rough or porous surfaces may need more.
Common mistakes to avoid
- Applying on wet paint. The paint must be completely dry first.
- Thinning the clear coat with water. Use it straight from the tin.
- Brushing over dust. Wipe the surface first, or the dust stays in the finish.
- Applying it too thick. Thin, even strokes look better and dry properly.
- Using a dirty brush. Old paint on the brush can mark the surface.
Frequently asked questions
Do I need clear coat on chalk paint?
Clear coat is not compulsory, but it is recommended. Madex Polyurethane Clear Coat protects the painted surface from scratches, marks and daily use.
How do I apply Madex Clear Coat?
Apply it directly with a brush, straight from the tin, without thinning it.
When can I apply clear coat after painting?
Apply it once the paint is completely dry. You can do it on the same day. Waiting 10 to 12 hours is fine too. What matters is that the paint is dry.
Do I need to add water to clear coat?
No. Use clear coat straight from the tin. Do not thin it with water.
How much area does a 500ml tin of clear coat cover?
A 500ml tin of Madex Clear Coat covers the same area as a 500ml tin of Madex Chalk Paint: 60 sq ft, enough for a double bed or a standard door, both sides.
Can I apply clear coat on wet paint?
No. The paint must be completely dry first.